Arjunt Universal

Grouting of joints 1–15 mm wide between any kind of floor or wall tiles, interior or exterior, easy to apply and water-resistant.

Depending on the thickness and width of the joints and the size of the tiles.
e.g., 33x33 cm tile 10 mm deep and 2 mm wide: approx. yield is 0.3–0.4 kg/m²
The average yield of ARJUNT UNIVERSAL is 0.5–1.5 kg/m².

5 kg bag (box of 4 bags)
10 kg sacks (480 kg pallet).
 

In the original container in a covered area, for up to 12 months.

1. Mix mechanically with clean water until an even, plastic mixture is achieved, without any lumps, using 26% water (approx. 6.5 l/sack).
2. Leave the mixture to stand for 5–10 minutes and then remix before applying.
3. Spread the paste with a rubber trowel (or extrusion gun), pressing down until the joints are completely filled.
4. Wait for at least 30–60 minutes before using a wet sponge to remove any remains of the product.
5. Once hardened, remove any remains still left, wiping the surface down with a clean, dry cloth.
 

Wait 24 hours after rendering or plastering the support before applying.
Protect porous facings with primer or masking tape to prevent them from being stained when applying the grout.
Do not apply in extreme temperatures, rain, strong winds or direct sunlight.

Mixing water approx. (%): 26
Apparent powder density (g/cm³): 1.2
Apparent paste density (g/cm³): 1.7
Apparent hard density (g/cm³): 1.5
Lifetime of mix (mins): 30
Bending strength (N/mm²): ≥3.5
Crushing strength (N/mm²): ≥15.0
Tensile strength freeze/thaw cycles (N/mm²): ≥3.0
Crushing strength freeze/thaw cycles (N/mm²): ≥15.0
Water absorption after 30 mins (g): ≤2
Water absorption after 240 mins (g): ≤5